Forget IP Camera password and default address,how to reset ip camera to factory default setting?
When they customer get the ip camera, most of them don't read the network camera user manual carefully and they go to operate it.
This always occur below problems
1. He may forget the ip camera default password or default address and can't log in adminstrative network camera system
2. As some misunderstanding of ip camera user manual, they may have problems to get a clear image or
don't know how to log in the Montitor system.
So what you need to do?
Certainly if you buy Axis,Toshiba, Vivotek or panasonic ip camera, you can well easy to search their
default ip camera password in the website or in web, but not all the customers use their IP camera ,
as their price is very expensive.
So you need to know how to reset the ip cameras to factory default setting if you buy Ip cameras
from some no famous but quality manufacturers
1. You should ask your supplier to check if there is some quick press-button which locate on the
bottom or up the ip camera housing, If have, you can press it and all things come to back factory
2. But not all Network cameras have a quick press-button outside or in the ip camera bottom, I mean you can't find it in outside by your eyes directly. In this situation, you have to let your supplier to send you a inner PCB structure picture and show you where can reset the factory default setting in this cameras. Almost all the ip cameras have press button to control that it can revert into original settings.
Take EXP-433B for example, I open the ip camera bottom housing and you will see this ip cameras PCB , see that press-button which I show you in the picture, just press it and all things comes into original.
If you have more other question,you can send email (firstname.lastname@example.org )to Judie.