Open the Router Setting interface on one computer. The interfaces for different routers are different, and the port forwarding (mapping) settings are different, please refer the router manual to set. For most routers, “Virtual server” option can be found in setting interface. Fill the IP address and port of IP Camera-0011 into corresponding blank. below picture is an example.
Select “status” option and remember the WAN IP address, enter the IP address in browser of PC-1, if IP Camra-001 can be visited via PC-1, the port mapping is success,also PC-2 and PC-3 can visit the IP Camera-001.
& WAN IP address is allotted by ISP, please make sure it’s an available WAN IP address. As WAN IP address is scarcity, many WAN IP address are available in limited area. If PC-2 and PC-3 are not in this area, the IP Camera-1 won’t be visited by them. So please make sure that your WAN IP Camera is not forbidden by our IP Camera security policy.
& If user wants to put several IP Cameras into WAN, every device should set the port forwarding. In order to distinguish these devices, every device should set a different port. If the port of the device is not 80, should add the port to IP address with colon to visit the IP Camera. Example: http://202.112.82.177:81.
.jpg)
